Approximately 1.5 μm thick CrN and CrAlN coatings were deposited on silicon and mild
steel substrates by reactive direct current (DC) magnetron sputtering. The structural and …

Ni–Co alloys with varying cobalt content were electrodeposited employing sulphamate
electrolyte. The changes in microstructure and corrosion behavior of electrodeposited nickel …

Interest in electroless plating of nickel-based ternary alloys has increased because of their
excellent corrosion, wear, thermal and electrical resistance. They also possess good …

TiAlN films were deposited on silicon (111) substrates from a TiAl target using a reactive DC
magnetron sputtering process in Ar+ N2 plasma. Films were prepared at various nitrogen …

About 1.5-μm-thick single-layer TiN, CrN, TiAlN coatings and nanolayered TiN/CrN,
TiAlN/CrN multilayer coatings were deposited on silicon (111) substrates using a reactive …

High phosphorus electroless nickel bath has been used to prepare composite coatings
containing alumina powders (50 nm, 0.3 μm and 1.0 μm). Deposits were characterized for its …

The corrosion behaviors of single layer TiN, CrN, TiAlN and multilayer TiAlN/CrN coatings,
deposited on steel substrate using a multi-target reactive direct current magnetron sputtering …

Nanolayered TiN/CrN multilayer coatings were deposited on silicon substrates using a
reactive DC magnetron sputtering process at various modulation wavelengths (Λ), substrate …

Metal matrix composites reinforced with nano-sized particles have attracted scientific and
technological interest due to the enhanced properties exhibited by these coatings. Ni–SiC …

A tandem absorber of Ti Al N∕ Ti Al ON∕ Si 3 N 4 is prepared using a magnetron
sputtering process. The graded composition of the individual component layers of the …